CTI Load transfer control panels
Presentation
The FG Wilson Load Transfer Panel range offers an electronically controlled response to power outages. With flexible, upgradeable options and a high level of functionality FG Wilson transfer panels provide 24-hour automatic control of standby generator sets, 365 days a year.Benefits
- Fully automatic mains failure sensing and generator set start signal
- Pre-programmed enabling the panel to run on installation with the ability to customise if necessary
- Fast acting switches reduce transfer times between set and utility power
- Available from 63 – 160A
- Seamless integration with FG Wilson digital control panels
Features
- Automatic and manual operation
- Automatically provides generator set start signal upon detection of mains failure, overvoltage or loss of phase
- Automatic mains re-transfer function
- Flexible, upgradeable options
- Test operations and sequences accessible from panel or remotely
- Manual switch operation possible via external handle
- LED functions display showing generator set / mains availability and switch position
- LCD display for voltage and timers
- Load transfer panel range meets ATS IEC 60947-6-1 standard
Main features
Set routine times for delay on starts, delay on transfer, delay on re-transfer and run on timer
Allows on/off load tests at routine service checks.
For straightforward programming and testing. Password protection is included.
Switch can be padlocked in all three positions for added security and safety. Only possible in manual operation mode.
Fully integrated handle for manual operation.
Auxiliary/volt free contacts for remotely monitoring the switch position.
Generator set remote start signal and terminals for remotely monitoring the system.
Auxiliary inputs for automatic control, remote test on load and manual re-transfer.
For added protection.
Panel can be wall mounted for greater flexibility in positioning.
Allows for pole voltage sensing.
Shows status of utility power, generator set and switch at all times
Shows detailed status of system at all times for greater awareness and control.
Allows the connection of neutral cables from utility power, generator set and load without having the neutral broken by the switch during transfer operations.
– Standard features are marked with circle
and optional features are marked with square 
.
| FEATURES AND OPTIONS | CTI | ATI < 1600A | ATI > 2000A |
|---|---|---|---|
| Motorised Mechanically Held Switch | |||
| Facility for manual changeover | Yes | Yes | Yes |
| Protection | |||
| Utlity power available | Yes | Yes | Yes |
| Utility power on load | Yes | Yes | Yes |
| Generator available / Generator on load | Yes | Yes | Yes |
| Utility power and generator off load | Yes | Yes | Yes |
| Manual mode / Automatic mode | Yes | Yes | Yes |
| Test on load / Test off load | Yes | Yes | Yes |
| Manual re-transfer for enabled / required | Yes | Yes | Yes |
| Power / Error indication (LED) | Yes | Yes | Yes |
| Facia | |||
| Universal symbols to allow for multiple languages | Yes | Yes | Yes |
| Liquid Crystal Display | |||
| Utility Power L1-2, L1-3, L2-3 voltage | Yes | Yes | Yes |
| Utility Power L1-N, L2-N, L3-N voltage | Yes | Yes | Yes |
| Generator Set L1-N, L2-N, L3-N voltage | Yes | Yes | Yes |
| Generator Set L1-2, L1-3, L2-3 voltage | Yes | Yes | Yes |
| Utility Power Frequency / Generator Set Frequency | Yes | Yes | Yes |
| Number of times switch transfers from mains to generator set | Yes | Yes | Yes |
| Timer settings | Yes | Yes | Yes |
| Standards | |||
| Complete enclosure meets standard IEC 60947-6-1 | Yes | Yes | Yes |
| Swith meets standard AC31B | Yes | Yes | Yes |
| Controls | |||
| Under / Over frequency failure | Yes | Yes | Yes |
| Under / Over frequency restoration | Yes | Yes | Yes |
| Manual / Auto re-transfer | Yes | Yes | Yes |
| Mode select push button | Yes | Yes | Yes |
| Under / Over Volts Failure | Yes | Yes | Yes |
| Under / Over Volts Restoration | Yes | Yes | Yes |
| Delay on Start Timer | Yes | Yes | Yes |
| Delay on Transfer | Yes | Yes | Yes |
| Delay on Re-Transfer | Yes | Yes | Yes |
| Dead Band Timer | Yes | Yes | Yes |
| Run On Timer | Yes | Yes | Yes |
| Auto / Manual Control Keyswitch | Yes | Yes | Yes |
| Lamp Test Pushbutton | Yes | Yes | Yes |
| Padlock facility | Yes | Yes | Yes |
| Selection between Contactor or Switch Mode | Yes | No | No |
| Cable entry | |||
| Top | Yes | No | No |
| Bottom | Yes | Yes | Yes |
| Load Terminal Extensions | |||
| Improving ease of installation | Optional | No | No |
| Auxiliary Contacts | |||
| For monitoring of switch position (Including padlocking & auto / manual) | No | Yes | Yes |
| Lightning Protection | |||
| Ensuring the safety of system during lightning storms | Optional | Optional | Optional |
| Ingress Protection IP54 | |||
| Protection for control module | Optional | Optional | Yes |
| Power Metering | |||
| To measure load current, kW, kVAr, kVA, Power factor | No | Yes | No |
| Volt Free Cotacts | |||
| For utility power availability & generator available | Yes | Optional | Optional |
| Communication Module | |||
| Plug in module that uses Jbus/modbus protocol to allow remote communication of the change | |||
| over system | No | Optional | Optional |
| Voltage Sensing Tap | |||
| Allowing for pole voltage sensing | Optional | No | No |
| Solid Neutral Kit | |||
| To connect neutral cables from the mains, generator set and load | Optional | Optional | No |
| Terminal Shroud | |||
| For added protection | Optional | No | No |
